Single-port,6-speed PHY operating at 10M,100M,1G,2.5G,5G and 10G
Alaska®
M 3610 Single-Port 10GbE Copper PHY
10/100/1000/2.5G/5G/10GBASE-T Ethernet Transceiver with PTP and MACsec
P/N MV-CUX3610, MV-CUX3610M
The Marvell® Alaska® M MV-CUX3610[M] is a family of fully IEEE
802.3an 10GBASE-T or IEEE 802.3bz/NBASE-T-compliant
single-port physical layer (PHY) devices that support the
following network rates:
• 10GBASE-T/5GBASE-T/2.5GBASE-T/
1000BASE-T/100BASE-TX/10BASE-Te.
The device integrates features such as Precision Time Protocol
(PTP)/1588v2, Synchronous Ethernet (SyncE), IEEE MAC
Security (256-bit AES MACsec, MV-CUX3610M only), and IEEE
802.3az Energy Efficient Ethernet (EEE).
The device supports XFI Rate Matching for 5G/2.5G/1G/ 100M/
10M with full backward compatibility with lower speed legacy
Ethernet rates including 1 Gbps, 100 Mbps, and 10 Mbps. The
MV-CUX3610[M] meets 10GKR electrical specifications on FR4
with an insertion loss up to 25 dB.
This PHY device family enables extremely low power across all
structured wiring cable lengths for 10 Gbps applications. The
MV-CUX3610[M] supports Category 6 and Category 6A cables
at full IEEE 802.3an range as well as Category 5e cables for data
rates up to 5 Gbps and distances greater than 100m.
These Ethernet transceivers feature integrated 1-step/2-step
PTP functionality in compliance with IEEE 1588v2 and
Synchronous Ethernet (SyncE) support. The device supports
PTP time stamping, through a Packet Control Header (PCH),
which complies with the USXGMII specification.
The MV-CUX3610[M] family incorporates Marvell advanced
Virtual Cable Tester® (VCT®) technology for cable fault
detection and proactive cable performance monitoring. With
advanced digital signal processing, the transceiver proactively
monitors the performance of a cable and determines cable
length and type. It can detect opens and shorts, then report
the location of a fault.
MV-CUX3610/ MV-CUX3610M+10GYT002/10GYT006/10GYT007+RJ45
关联IC:MV-CUX3610， MV-CUX3610M
